Update.
Flywheel was an absolute sod to remove. Someone had greased the taper and it had gone hard as brick. Plenty heat and about 24hrs under constant tension with warming and cooling cycles during waking hours. It ended up coming apart with a very disconcerting snap! Thought I had pulled the centre out of the wee Wipac Banta-Mag. 😯
Is all good now with everything cleaned up and checked.
Coil reads between 3K – 4K and 3 – 5 Ohm. 😎
Points are cool both open and closed. 😎
Condenser is very erratic but averages 0.62mF Totally 🙁 I will replace with something 0.1 – 0.2
Broke a head bolt as not enough heat first go………I will be more attentive in 2017. No probs broken bit out.
As many pics that will fit so far….
Some pics
So many edits because my poor old lappy is short on RAM.
Next the carby.
This is all too good so will not be splitting cases or removing barrel.
BnC