Re: 1929 Evinrude 14hp Fastwin Piston cotter pin

Home › Forum › Ask A Member › 1929 Evinrude 14hp Fastwin Piston cotter pin › Re: 1929 Evinrude 14hp Fastwin Piston cotter pin

May 11, 2015 at 12:33 am #15684
bob-d
Participant

    Thanks Jim for the tip. The original pins were a 5/32" and were very snug in the holes, so I just replaced with the same size.
    Will do a light hone on the bores, and found some replacement piston rings from Dan Gano. Hopefully shortly it should be good to go.
    Bob D