Ok well I took it apart a ways yesterday just to see what I have to work with and it came apart too easy. All of the screws holding the tank and cowlings together weren’t even hand tight. The flywheel nut also wasn’t very tight, the mag plate itself was loose, one spark plug wasn’t even hand tight and the other is stuck. Anyways I really just wanted to see what the coils looked like so that is where I went first. What does everyone think of these? Why would they do this? The seller said there was spark on one cylinder but not the other which makes since because one of the points is gummed up enough it is stuck open. Will these need replaced or just cleaned up?
I will check on the screw driver grip as well.
