Re: Johnson PO-15 throttle cable

[George Emmanuel]

There was a stainless, for lack of a better word "Twisted" bowden cable used on those with the large hole. The cable had solid ends pressed onto the cable. I have a couple of NOS ones but I find them very stiff. Use what you have and it will work well. You could probably use a short piece of copper tubing over your cable to fill the gap. You’d have to somehow compress the tubing over the cable, but there is not a lot of stress on that throttle cable. You might have to file the copper tubing a bit for a good fit, but it will work.

You do have the cable routed correctly in the picture.

George