Re: 9.5 hp 1966 mdl 9622a lower gearcase

Home › Forum › Ask A Member › 9.5 hp 1966 mdl 9622a lower gearcase › Re: 9.5 hp 1966 mdl 9622a lower gearcase

December 5, 2016 at 2:01 am #48560
fisherman6
Participant

    US Member

    You do not need to remove both screws. Only the bottom one. It’s just that it needs to be removed completely. It sounds like you have already done that. Not sure why it is still stuck. Could be rusted drive shaft splines. It.could also be the water tube grommets stuck on the tube. I have had those get stuck pretty good to the point of pulling one of the grommets out of its seat and having it still stuck to the water tube.
    -Ben

    OldJohnnyRude on YouTube