Re: 1929 Evinrude 14hp Fastwin Piston cotter pin

Home › Forum › Ask A Member › 1929 Evinrude 14hp Fastwin Piston cotter pin › Re: 1929 Evinrude 14hp Fastwin Piston cotter pin

May 9, 2015 at 10:55 pm #15618
jim-moffatt
Participant

    US Member

    Squeeze the sides together with needle nose pliers or a screwdriver. Then use a cotter pin puller or hook to pull out the pins from t he bottom of the piston.
    Make sure your new pins are the correct diameter and length. Use a screwdriver to spread them apart.