Re: kill button switch on a 9622A 9.5 sportwin

Home › Forum › Ask A Member › kill button switch on a 9622A 9.5 sportwin › Re: kill button switch on a 9622A 9.5 sportwin

November 29, 2016 at 4:39 pm #48203
chinewalker
Participant

    US Member

    You can take the switch apart to clean the contacts. Remove it from the housing. Spritz a bit of WD-40 on the underside of the switch and gently pry the rubber boot off the plastic base. You’ll see a copper cup in the boot and two posts in the base. Clean them up and gently put the boot back over the base. Issues with these switches are also related to the wires crumbling with age or the wire core going green with corrosion.