Home › Forum › Ask A Member › Searching for a 10 hp Johnson or Evinrude › Re: Searching for a 10 hp Johnson or Evinrude
Paul, The bolts are not under the hood. The bolts are on the lower portion of the exhaust leg where the lower unit connects. There will be the usual (4) 7/16′ hex head bolts that go up from the bottom and thread into the exhaust housing. The fifth bolt is a larger 9/16" hex head bolt that threads into the lower unit from the top down through a hole in the back of the exhaust housing. I do not have a picture at my disposal at the moment, but I own multiple OMC 10hp motors in each configuration. I can post a picture of each this evening after I get home from work if someone has not already posted some. 😉
-Ben
OldJohnnyRude on YouTube