Re: Time to share your Redneck Homebrew fixes for the 9.5 OMC Front Motor Mount Issue

Home › Forum › Ask A Member › Time to share your Redneck Homebrew fixes for the 9.5 OMC Front Motor Mount Issue › Re: Time to share your Redneck Homebrew fixes for the 9.5 OMC Front Motor Mount Issue

November 23, 2016 at 2:24 am #47870
PugetSoundBoater
Participant

    I fixed the broken rubber in a lower mount on a 1984 Evinrude by cleaning the surfaces really well and used 5200 ,clamped it and let it sit for a day or two. I believe it is still fine and holding.
    If you drilled through the metal mounts for a bolt, you may want to drill the hole in the metal larger than the bolt a bit to allow the mount to still flex, and don’t overtighten it so it dosnt move ,using nyloc nuts?
    How about 2 good quality stainless steel hose clamps ? You got redneck questions , I got redneck fixes. YEP .

    "Some people want to know how a watch works, others just want to know what time it is"
    Robbie Robertson