Here’s a tip to help out while fogging motors to empty the carb/fuel lines and coat the internals at the same time. With the motor running, I unplug the fuel line and use a cheap dollar store timer to see how long it will run before running out of fuel. I do this several times without adjusting the throttle to make sure I’m getting consistent times. When I’m ready to fog, I watch the timer and when the motor is getting near the end of its fuel supply, I start spraying the fogging oil. This way, when the motor dies I know its from lack of fuel and not from the fogging oil fouling the plugs and leaving fuel in the system.
If you are using Sea Foam to decarb a motor or fogging a motor, it’s best to do this on a breezy day or at night if you have neighbours nearby!
Attachments:
