Home › Forum › Ask A Member › Rebuilding ELTO Ruddertwin Coils & Other Tips Needed › Re: Rebuilding ELTO Ruddertwin Coils & Other Tips Needed
A few options here.. The Zephyr coil is the way to go. One word of warning… the pitch used in the original coil is nasty stuff wear protective gloves and such. Gently heating the original in an oven will warm and soften the tar to a point where the guts will come out. I have heard of others freezing the unit but I did not go with that. The end caps are sometimes held in with tacks or small brads so look for those. Be careful with the caps as the are fragile. I have one that I did, and wired up, I can get you that wiring schematic later today, if you need it, or in a couple of days that way I can celebrate my birthday today with my wife and not play with any motors…LOL I can add pictures as well, but again gimme a day or so…
Regards
Richard
http://www.richardsoutboardtools.com
classicomctools@gmail.com