Re: Flywheel persuasion

Home › Forum › Ask A Member › Flywheel persuasion › Re: Flywheel persuasion

November 1, 2016 at 11:09 pm #46848
olcah
Participant

    US Member

    Got it loose! I had put PB blaster, other tapping fluid, thin oil etc onto the center of the flywheel below the nut. Then tried used a pry bar as shown in Doug Penn’s how to remove flywheel video on YouTube. Then I put some Tap Free (very thin oil) below the nut, tightened the puller some more, hit the puller center screw and that did it. The photo below shows that the taper is rusty and that must have held the flywheel.
    http://i77.photobucket.com/albums/j66/c … wcwx2s.jpg