Re: Prepping for painting a motor

Home › Forum › Ask A Member › Prepping for painting a motor › Re: Prepping for painting a motor

March 15, 2015 at 11:40 pm #12071
chris-p
Participant

    I buy all my paint from NYMarine, so they are compatible. Trouble arises when you start mixing suppliers as mentioned. If you buy from Reprotint, you will be ok too.

    I do the same as Wedgie, degrease using Super Clean and pressure washer, then wipe off with acetone, then quickly spray on self etching primer. A lot of paint can be laid about half hour after self etching primer, and I usually lay about 3 coats of paint.