Re: Interpreting an expansion plug number?

[amuller]

Well, I bought it. $100 but whether it is a runner remains to be seen. It’s obviously felt some significant Mickey Mousing.

Quick compression test didn’t give consistent results–varying in the range of 60 to 80 for both cylinders.

There seems to be a freeze crack just above the skeg. could be all junk inside.

The pump on it is the little square one. This doesn’t seem right–do these pumps move enough fuel for 40 hp?

How hard is it to remove a 5" leg extension? Water tubes and driveshaft I presume have to change. Anything else?

Thanks, as usual.