Home › Forum › Ask A Member › Mercury KH7 won’t fire › Re: Mercury KH7 won’t fire
You will have to swap the cam, (be careful removing the cam they are hard to find) flywheel and all but should work. It is actually not that bad to change the bearing pull power head and take bottom cover lose (that is the hard part mine did not want to come off.) Heat up the plate and bearing should push out may fall out on its own. Replace seal and put bearing in freezer for a while to shrink it then should press in easily. Replace gaskets and reassemble. Trick from Joe Poole is to put a thin coat of red loctite on outside of the seal when you go to put it in. Top seal take an awl punch hole in top of seal put in sheet metal screw and pull out.
Doug
how is it motors multiply when the garage lights get
turned off?