Re: How does it come apart?

[Tom]

Tom,

For clarity, I assume you’re trying to save the transom bracket and the collar that supports the down tube (leg) from one motor, and use the leg from another motor. If that’s not correct, ignore anything I’ve written.

So to remove the leg assembly (B) from the transom bracket and collar (A), you need to slide it up out of the collar. The simple way to do that is to remove the foot, then get the water tube inlet and outlet out of the way. These are not attached at the location where they penetrate the leg. So you can remove the nuts on the outside of the leg, and press them into the leg so they don’t protrude out. Then slide the leg up out of the collar.

Tom