Re: Oliver 16hp Flywheel nut

[RICHARD A. WHITE]

Held on the same way Mercury flywheel nuts were held on back in the day….Special tool "needed" OR you can wrap a very heavy strap around that nut and use a pipe wrench, the wrench does not need to be tight just bite on the strap and not so much on the nut itself..

Not the optimal way but it will work, and your point will be totally corroded, every Scott I have ever worked on that was the issue, clean them well and clean them again…should get you sparkin

http://www.richardsoutboardtools.com
classicomctools@gmail.com