Re: Thoughts on this Water Witch?

[beerman57]

Flywheel says "Eisemann magneto 61-G. Coil has 5,360 ohms and .5-.6 ohms resistance, that’s OK, right? Set points to .020"? Probably will need a condenser. The coil is hanging over what I think is the adjustment ring, but not rubbing on the flywheel, should I move in? Put some liquid electric goo on the bare plug wire coming out of the coil? The oldest motor I’ve ever worked on was my 1950 Johnson 10hp, so this baby is all new to me. The carb and doing an impeller? look like a learning experience.