OK – the crankcase/driveshaft housing assembly floats on rubber shock absorbers on the steering handle support bracket. The 202394 brass pivot bearing liner goes between the pivot bearing on the bottom of the support bracket and the 276547 pivot bearing assembly. The 202090 Exhaust seal is at the bottom of the pivot bearing on the handle support bracket. In the bottom of the pivot bearing assembly is a 202230 rubber pivot bearing bushing with the 202229 bushing liner inside. A 200685 spacer is between this assembly and the lower unit. The rubber bushing on the bottom and the rubber shock absorbers on top should keep the drive shaft housing properly lined up.
Garry
