Re: KG 7 Runs Rough

[slim60]

Thanks Guys; Two years ago new coils, condensers, and copper plug wires. I cleaned and set the points to 0.18. Then spun the crank with a battery gun for ten seconds and got a good steady 1/4′ spark. Installed flywheel and squirted fuel in the intake. Roped it over. Both cylinders hit. Installed carb and squirted fuel in throat. Hit on both again. Installed gas tank and it ran good after a few minutes. Idles smooth. Even while breathing some of it’s own exhaust. Now it needs a good run on a boat. I have a Lund 12′ so I can only dial it in on a smooth day. Last year it pushed my Alumacraft to 24 mph. I think it’s just a recurring fuel problem. Thanks again.