Re: New Toy CD-12 Tank Cleaning question

[bullie]

quote Fisherman6:

The primer button does not pressurize the tank. The button pumps fuel to the carburetor to prime it. That allows the engine to start and run long enough to pressurize the tank and start the flow of fuel. Crankcase pressure pulses pressurize the tank. The primer button’s job is only to get file to the carb so the running engine can pressurize the fuel tank.

If you hold the plunger open with ano awl or something andifferent pump the button while it is open, fuel shouldcome out of the fitting. If the button pumps fuel and none is getting to the carb, there is a blockage in the fitting or the line on the motor. Hang in there, we’Lloyd get this figured out. 😉
-Ben

Ok. Lack of understanding on my part then. Its almost cooled down enough to get in the garage for a few minutes. 106 Heat index today. I will check it out and report back. It may be that I repaired it correctly but just don’t know what I am doing. 😆