Home › Forum › Ask A Member › Question on my Herter’s boat. › Re: Question on my Herter’s boat.
August 1, 2016 at 1:17 pm
#41400
Why don’t you just get some 3M 5200 and bed the pieces in it. Hold the piece up to the boat and mark around it with a pencil and then use masking tape on the boat to minimize the clean up. put enough sealer on the part so when you push it up to the boat it squeezes out then put your bolts in. Done. 5200 sealer is permanent comes in white , black , and mahogany.