thanks frank, by the time I read your post, I already had it back together. I am continuing to have trouble keeping this motor running. starts fine but dies from what appears to be flooding. I just went through the carb with new everything. when it’s lying on it’s rests with the carb facing skyward and then gets stood straight up, fuel runs out of the lower unit through the exhaust holes, etc. i’m assuming fuel is continuing to flow into the carb, through the crankcase, into the cylinders and out through the exhaust ports. any idea why this is happening? I seem to have a funky non stock petcock for the fuel shut off. I suspect this may be to blame. it’s the kind that does not close (screw) shut but when it is in line, the fuel flows but when it’s at 90 degrees to the fuel line it’s shut off. here’s a picture of it.
so can anyone tell me the initial carb settings for the lightwins?
thanks!
scott
Attachments:
