Home › Forum › Ask A Member › Tillotson Carb Question › Re: Tillotson Carb Question
July 24, 2016 at 9:46 pm
#40846
quote david bartlett:
If there is a channel where the fuel can travel around the jet, then alignment should not be an issue.
Some of the Wallbro carbs have jets that are drilled through in place and need to be left alone because you can never get them back in correctly.
Are the holes you are referring to drilled through the threads?
Yep, the holes are in the threads. There is a channel for the fuel to travel around for about 1/4 of the circumference. But, like Frank says, alignment shouldn’t be an issue. Thanks.