Home › Forum › Ask A Member › Ground Problem? › Re: Ground Problem?
The almost new solenoid I have with me tests fine. The weird deal with the motor turning over but not starting until you jumped across the large solenoid posts, that is just completely baffling to me. After that the motor would start fine all day, until it was allowed to sit for a week or 2, then would have jump across the large posts again. Oh, the starter never seemed to be dragging before, not that I noticed anyway.
So, as I expected, there is probably nothing wrong with either solenoid. I’ll check the grounds and volts at the yellow/red, small solenoid terminal. I’m going to start on new axles, springs and bunk brackets for this boat’s trailer tomorrow. But at 3pm there is the celebration of life for my welder friend.