Re: 1963 Johnson QDL-24 10HP

Home › Forum › Ask A Member › 1963 Johnson QDL-24 10HP › Re: 1963 Johnson QDL-24 10HP

July 11, 2016 at 11:41 pm #40033
chris-p
Participant

    SteeleMan,

    As stated, the shaft will only fit in that linkage piece one way. Flat side of shaft, to flat side of the linkage piece. You can see the shape of it in your diagram actually. There is no adjustment there. There is nothing to adjust from simply taking the carb off, as long as the linc n sync was fine before you started of course.