Home › Forum › Ask A Member › 1963 Johnson QDL-24 10HP › Re: 1963 Johnson QDL-24 10HP
I am unsure how to add a photo, and I am away from the motor until this weekend. That i took apart would be part 39 from the shaft in the diagram here. https://www.marineengine.com/parts/john … etor+Group
It does not have a notch, it will go on in any position as long as you set the screw. I opened the throttle on the handle up full which allows the magneto to push the rubber wheel all the way down to full throttle. Then I held the throttle on the carb open full, pulled the linkage tight and set the screw. I am just concerned that It then advanced the spark too much. I did notice the notch on the mag that pushes the rubber wheel down. I will see where that notch is when I get back to it this weekend.