Home › Forum › Ask A Member › 1957 Evinrude 35 hp powerhead removal › Re: 1957 Evinrude 35 hp powerhead removal
July 11, 2016 at 2:04 am
#39998
Yep, two bolts with 1/2" hex heads near the rubber mounts, and two nuts, also 1/2" hex on the inside, up front. And a screw holding the silencer to the lower front pan. It will also be easier to put back together if you remove the shifter interlock bar from the side, and the vertical throttle shaft on the opposite side. And of course any hoses or wires.