Re: 1964 Johnson 90HP Engine Timing

[joesnuffy]

We finally got started on the motor. Got the carb off and fuel pump off. Checked the preliminary timing of engine belt/carb mark/flywheel marks/distributor marks and it was all as it should be just have to put in new points/condenser and check the points opening and closing with a test light.

Having trouble getting the lower unit to drop. Does part number 32 (Inlet Housing) have to be removed (in the web page posted below) to get to a bolt underneath it? I didn’t want to force it if their is a bolt underneath it. We are having trouble getting the front screw on the inlet housing to come out don’t want to break it. We actually had trouble getting the other 3 out but we can’t seem to get that one.

https://www.marineengine.com/parts/john … case+Group

Thanks,
Joe

ps turns out engine is a 1966 100hp

https://SecreLocal.com - - No Verify - Anonymous Adult Dating -