Re: TN26 resurrection

[cajuncook1]

This information was obtained from the Poche Website.

quote :

Carb Cap Gasket Leakage after Re-install: Sometimes the carburetor cap gasket will leak a little on re-install. Run the outboard and allow the gasket to swell with gas and oil. It might also be that the float is stuck after the motor has not been run for a long time or the float was recently replaced. This usually will stop after a few minutes of running the outboard. If gasket continues to leak, the carb head screws might need re-tightening or the gasket might need replacement.