Re: Off with its head !

[kerry]

I have found a pencil grinder (air) or Dremel tool (electric) with a small end mill, usually 1/8", to be very valuable. Larger broken bolts, I mill a slot for a screwdriver. That fails, I mill flat for the center punch, or plunge a little for the drill bit. Works great to add that little bit of clearance you need. Oblongs a hole that was drilled a little off because the bit wandered a smidge. Grinds new flats on rounded nuts or bolt heads (my favorite) Many other possible uses that fate hasn’t shown me yet. Would probably work to grind away enough to split it.

If you have too many, AND not enough, you're a collector.