Home › Forum › Ask A Member › Scott 10 hp where is water pump › Re: Scott 10 hp where is water pump
It is a 1956. Water pumps are in the exhaust housing, below the powerhead. Don’t pull the powerhead, remove the exhaust housing. Easy enough to do. look in the area of the lower spring mount. See that reverse tilt lock assy, the piece that goes around the shift rod? Remove that piece (some E-rings) Now remove the lower spring mount retainer bracket (couple of screws). Now remove the bunch of screws that hold the exhaust housing to the powerhead. When the last one is out, the exhaust housing will drop down and away, and the powerhead will hang there in the upper spring mounts.
The rest looks complicated but isn’t too bad. 😯 You have to remove that goofy shift mechanism to get to the water pumps. It really isn’t that hard to do, once you make up your mind it has to be done. Bunch of E-rings and roll pins. That long crosswise pin will slide out.
Nothing to it. You’ll be the new Scott-Atwater guru on the block. 😎