Home › Forum › Ask A Member › Greenpea needs help › Re: Greenpea needs help
If you want to try soldering on a new plug wire, tin the new wire very heavely. To remove the old wire place the soldering tip on the TOP! of the soldered connection & pull on the wire. When it gets hot enough the solder will let go & get off the terminal right NOW!!. To place the new wire have the end tinned very heavy with solder. Lay the cold wire end on the terminal until you feel the solder start to melt. Make sure the solder on the wire gets shiney like chrome & move the heat away now if not sooner. Be sure the wire does not move ANY until it cools off. Moving the wire will result in a cold joint & high resistance. Like I said I will do it if you want.Good luck & maybe practice on a bad part
Jeff