Re: Greenpea needs help

[bullie]

Ok. Learned some stuff. Just getting back around to this motor.

#1 When you decide to change the impeller on a TN 26 it is best to remove the LU lube through the drain plug before beginning. You certainly don’t have to do it that way though, as it is going to come out the top if you decide to just drop the LU first.

#2 Even though I have the LU off I still don’t know how to get the impeller out of there. I have it detached from the plate and can see that it has lost a vane or two but I don’t know how to get it off the shaft without further pulling the cable down, which seems like it would be a bad thing.

What is the proper procedure from this point?