Home › Forum › Ask A Member › 1948 Evinrude Sportwin 4423 Revisited › Re: 1948 Evinrude Sportwin 4423 Revisited

#14634
Buccaneer
Participant

    US Member

    Thanks Gary. There shouldn’t be any plugage in the carb after
    thorough probing and pinesol soaking last Fall.
    I can’t remember anything about the venturi. You mentioned it
    was a replaceable part. Is it plastic or metal I wonder?
    Suppose it could be buggered up.
    I’ll try resetting the fuel needle back less from 3/4 turn open,
    and fiddle with the shutter some more.
    Not sure how much more "pulling" my shoulder will take today though!

    P.S.- I can’t remember much about the exhaust silencer inner workings.
    I do remember there’s another shutter in there to bottle up the
    crankcase. Anyway, the silencer exhaust out the back of the
    spring like tube, but it seems to be blowing air, not exhaust.
    When I plug the tube hole with my finger, it does affect the engine rpms.
    How do it work, and is it working correct? 🙂
    Buccaneer

    Prepare to be boarded!