Home › Forum › Ask A Member › Chrysler outboards? › Re: Chrysler outboards?
I owned a 1965 west bend / chrysler (change over year) 9.2 many years ago. it seemed to run well. that motor was carried forward about until the low profile chrysler 9.9 was debuted. i think you can find a sierra water pump that will fit that 9.2- i never had to change mine but Sierra does carry some chrysler pumps last i knew but i heard they obsoleted a lot of chrysler parts recently so you may have to find the sierra number and then hunt around on the internet.
IF your motor needs coils then try replacement OMC coils- on most of the older west bend motors the laminate dimensions were the same as OMC replacement coils so you could slide the bad coil off and then install an OMC coil instead of hunting down some much more expensive coil.
looks like the 9.2 was phased out in 1968. there is a lot of information out there on them if you google chrysler 9.2 outboard
https://www.rockauto.com/catalog/rafram … =marine&ck[ID]=0&ck[idlist]=0&ck[viewcurrency]=USD&ck[PHP_SESSION_ID]=ebdnkr9cv2likgfamhce62v8m5