Re: 1957 evenrude 3 hp won’t run

Home › Forum › Ask A Member › 1957 evenrude 3 hp won’t run › Re: 1957 evenrude 3 hp won’t run

June 12, 2016 at 4:33 pm #38140
JACQUES
Participant

    the gas flows up after being let into the HS central post "side hole" when the HS needle is backed away. that fat gasket is meant to ensure fuel only flows up from the controlled entry in front of the pointy HS needle

    have you tried to feel the carb sucking air while you pull the starter cord ? it should

    does the choke plate fully close ?

    Joining AOMCI has priviledges 🙂