Re: CD-14 requires full choke for idle and run

Home › Forum › Ask A Member › CD-14 requires full choke for idle and run › Re: CD-14 requires full choke for idle and run

June 5, 2016 at 11:35 pm #37741
chris-p
Participant

    I have seen many floats that were "coated" with who knows what, and when fuel contacted it, the coating melted off.

    Regardless, you have to open it up. It is running WAY too lean, likely due to a restriction like you think, or an air leak somewhere.. You have adjusted the needles correct>>?1.5 turns out from seated for the low, and 3/4 for the high, then fine tune on the water.