Home › Forum › Ask A Member › Evinrude Model A? RBM – Help needed. › Re: Evinrude Model A? RBM – Help needed.
it seems that we run into a bad habit here
it was a good and helpful discussion / topic but now we are hiding things behind a PM ! ???
secrets or what ?
.
Hello Kees, I can say with hand on heart that there have been no secrets shared via pm. When I started this thread it was suggested that I reach out to Brook Newcombe and to the Prime Minister of the Southern Ontario Rowboat Motor Chapter. You will see reference to that earlier in this thread.
Summaries of PM’s as follows:
To Brook. Introduced myself, referred him to this thread and my photobucket and asked for his opinion on what I had. Brook advised by return pm last night that he has been on vacation and will come back to me with his opinion soon.
To Richard. This was a response to a pm from Richard to myself, in which I stated that I agree with his logic and also believed that my RBM was most likely a Model B. That belief came from a full review of the spreadhseet night before and a cross check of parts fitted to my RBM.
The fact that I agree with Richards logic, means that I also agree with your logic. I am very greatful for the support you guys have provided and have stated that on numerous occasions already.
If however you have any remaining doubts, please feel free to contact both above-mentioned gentlemen directly and they will confirm.
btw. was checking my pile of motors and parts and came up with
a model B with # 11514 ( an early 1913 )
a model B with # 20917
a model B with # 21306 ( both early 1914 )
shall I take photos ? and post it here ?
well, I think I wait for a while and take a walk first
clean my head and made up my mind
send you a PM 😯
such a pity
🙁
.
I can only hope that that the above clarification to the pm situation has given you the peace of mind you need to proceed with posting the photos here. Even if you are still in doubt about me, consider that others following this thread would miss the opportunity to see them also.
There is always a potential for written communications to be taken the wrong way. to that end, I honestly believe that if we were having this entire discussion face to face, your opinion of me would be very different.
Respectfully.
AusF233