Re: TN-28 carb overhaul

Home › Forum › Ask A Member › TN-28 carb overhaul › Re: TN-28 carb overhaul

April 22, 2015 at 2:06 am #14476
obnut
Participant

    Well I put the carb in the freezer for about 5 hrs. Using the tools that David Poche discussed in his articles, I was able to pluck those blasted stubborn washers and leather seals right out of there. The brass washers must contract with the cold faster than the aluminium carb housing. Anyway it worked. I do need new leather seals as they are not in very good shape.