Home › Forum › Ask A Member › First pressure tank…. › Re: First pressure tank….
May 29, 2016 at 4:35 pm
#37314
Anonymous
quote Mumbles:
Some 10-24 screws with the heads cut off will act as guides to help keep everything lined up while putting it back together.
The guides in the photo here are made from the extra screws which come with new OMC/BRP coils
.quote david bartlett:
Nothing to scary in there. If you can do a carb, you can do this!
Thanks! I managed to reassemble an incorrectly put-together square fuel pump…. Only took me three tries…. Can’t be worse than that!!