Home › Forum › Ask A Member › Lightwin 3 HP gets hot › Re: Lightwin 3 HP gets hot
I have had the head off and cleaned the coolant ports the best I could but I think Ill have another look. This inst the first I’v worked on as a matter of fact its probably getting close to the 200th. I also pulled the exhaust plate and cleaned the small port in there. I’m pretty certain that its getting plenty of water up the tube as when i pulled the flush plug on the lower side of the powerhead it would shoot water about 4 feet out the plug hole. the old impeller was whole and no veins were missing or broken, it was just getting hard and wanted to make sure that it wouldn’t be the cause of a problem. I like the idea of pulling the powerhead and inspecting te lower ports I’ll report back to let yall know what I find and maybe get some pics up. Thanks for the helpful replies.