Home › Forum › Ask A Member › 1984 Johnson Sea Horse carb question. › Re: 1984 Johnson Sea Horse carb question.
Everyone thank you for the info. The float appears to be in excellent condition and will remain. The lead shot will not be touched unless needed. I realize the compression appears to be low but part of that could be my gage though my technique has been improving due to a thread in an old post. There does not appear to be any blistered or blackened paint on this motor to indicate over heating. I am just trying to get it running to check the impellar(may replace sooner) and lower leg condition while running a couple tanks of sea foam/40:1 to loosen the rings. If it runs rough or has power issues, I will rebuild. Anything other issues that these 2 hp motors are noted for?