Home › Forum › Ask A Member › Stumped…AGAIN, 1962 OMC 10hp › Re: Stumped…AGAIN, 1962 OMC 10hp
May 8, 2016 at 3:51 pm
#36230
No that was the QD19. Bought this block from Don Kellogg and it seems fine, besides maybe the recirc hose. Looks like pulling the P/H and mag plate are the way to go. Remember, the whole P/H is covered with fuel (recirc hose spraying it out and air movement from the flywheel spreading it around?). BUT, that raw fuel dripping off the lower shift arm seems to be a separate problem to me. The shift arm through the midsection has very, very little slop.