Re: Need British Seagull Help-spark not happy

[Michael Anfossi]

20 thou is a good starting point. Are you sure the points are clean? Clean them again – pretty hard to clean well if still inside the flywheel assembly. That is usually cause of no spark. Points in a round brass container, correct? Under that container is the condenser. These are a royal PITA to work on as several little pieces and insulating washers that need to installed correctly to make it work. Have you checked coil for continuity? How about continuity of the HT lead? Also remove HT lead from ignition plate and make sure contact and contact point on coil are clean.