Home › Forum › Ask A Member › 1974 Evinrude 9.9 won’t idle at low RPMs, need help › Re: 1974 Evinrude 9.9 won’t idle at low RPMs, need help
What brand of carb kit did you buy, so we will know who dosn’t supply the needle valve seals. I always buy BRP parts.
While replacing a water pump early on in outboard repair , I saw a water pump inpeller that I was replacing, the rubber was not bonded anymore to the metal octagonal shaped hub,and remember Leeroy’s Ramblings photos of a Sierra impeller octagonal hub,now identified as a Sierra brand,I decided then and there I would always get factory parts. A lot of good info and photos on his site ,a whole section for the 9.9/15.
"Some people want to know how a watch works, others just want to know what time it is"
Robbie Robertson