Re: Mercury Mark 5, first run, first problem

[billw]

You can make the prop tool out of PVC pipe. Find a size to fit over the prop hub. Cut angled slots in the sides of the pipe, such that it will grab the prop blades. Glue on an end cap and drill a 1/2" hole in the end cap. Glue (I used Plexus) a 1/2" bolt and nut into the hole in the end cap. Now you can use a torque wrench and 3/4" socket to apply torque to the prop. Keep in mind it’s a lot easier to use a beam or dial-type torque wrench, than a click-type, in this case.

Long live American manufacturing!