Home › Forum › Ask A Member › Solved – Can’t drop lower gear case 1957 RDE-19 › Reply To: Solved – Can’t drop lower gear case 1957 RDE-19

#324178
JACQUES
Participant

    now the work begins.  Try to do a compression test before spending big$$$… if ok and near equal… onward to electricals

    you will need the pull the flywheel inspect coils for severe cracks, replace both coils & condensers…..  points may be ok if burnished and cleaned.  new plug wires  7mm metallic strand wires  only  etc.. etc..

    great great hobby and lots of help here  to bring it back to life ( dump gear case oil check for water ingress.  refill.   some seals may be leaking  pull the prop check for mono wound up on the propr shaft destroying the seal.. resealing is tricky but after a few it is ok. Some folks just  change oil mid season if the leak is not to bad.  Pressure testing  with soapy water will locate the leak in one of 3 places  usually   #1 prop shaft seal    #2   shift rod seal      #3   driveshaft seal under the water pump.

    Bing Videos

     

    the johnson manual I linked  contains all you needto service  it  plus utubes galore  to help out.

     

    for parts.. select your model

    1957 Johnson Evinrude 35 hp Outboard Parts by Model Number

     

    y

    Joining AOMCI has priviledges 🙂