Re: Johnson TD-20: Looking for some input…

Home › Forum › Ask A Member › Johnson TD-20: Looking for some input… › Re: Johnson TD-20: Looking for some input…

April 4, 2016 at 11:33 am #34311
aquasonic
Participant

    With the original cork floats, the top of the float should be even with the groove in the brass float needle. The retainer clip fits into the groove and the tiny brass wood screw then keeps it in place at the correct level.

    I’m not sure about the retrofit Merc floats, but I would think it should be at the same height?

    Improvise-Adapt-Overcome