Followed Don’s advice and soaked the coil connector plug in alcohol for about 30 minutes then used a piece of 1/8″ brass tubing I had to remove the amphenol pin for the defective coil from the plug. Tubing fit perfectly over the pin and with a little pressure the pin backed right out. I’m going to cut off a length of the brass tubing and insert it into a wood dowel for a handle and I’ll have my own pin removal tool for a whole lot less than $70.
Bob
1937 Champion D2C Deluxe Lite Twin
1954 Johnson CD-11
1955 Johnson QD-16
1957 Evinrude Fastwin 18
1957 Evinrude 3022
1958 Johnson QD-19
1958 Johnson FD-12
1959 Johnson QD-20
1982 Evinrude 25hp
“Every 20 minute job is only a broken bolt away from a 3-day project.”
"Every time you remove a broken or seized bolt an angel gets his wings."